Residential Panel Hardware & Easy Installation

Get everything you need for a smooth installation with our residential hardware solutions.

Designed for flexibility, our systems work across a wide range of interior and exterior applications.

We offer:

  • Standard and specialty framing.
  • Fully custom mounting solutions
  • Hardware tailored to your project.

 

All orders include installation-ready hardware and instructions, so you can install with confidence!

Standard Hardware Options for Panel Installation

Provided at no additional fee for the mounting method you specify:

  • Direct-Set Screws – available for 1/2″, 3/4″, 3/8″ & 1″ thick outside-mount window treatments, ceiling treatments, and decorative accents.
  • Direct-Set Screws w/Spacers (specify spacer size) – available for 1/2″, 3/4″, 3/8″ & 1″ thick outside-mount window treatments, ceiling treatments, and decorative accents.
  • Lateral-Set Screws – available for 1/2″, 3/4″,  & 1″ thick inside-mount window treatments and inside-mount decorative accents.
  • Hinge & Catch Magnet (mounted left/right, or top/bottom) – available for 3/4″ & 1″ inside-mount window treatments and decorative accents.

Specialty Hardware Framing & Installation Add-Ons

Upgrade your installation with specialty hardware options built for unique applications and enhanced performance. Available for an additional fee, these custom mounting solutions are tailored to your project for a precise, professional finish.

Customize your hardware setup.

Provided for an additional fee for the mounting method you specify:

  • Solar Screen – Choose from a variety of Mermet Solar Screen colors and fabric densities. Solar Screen will come pre attached to the back on your Tableaux to block out light or add privacy. Solar Screen is safe for indoor or outdoor applications. Available option for 1/2″, 3/4″ or 1″ thick window treatments, ceiling treatments, and other decorative accents. 
  • Groove & Spline Only – specify groove & spline only (without solar screen) and install your own fabric. 
  • SnugSeal™ Gasket – Snug Seal comes preinstalled to the sides of your inside mounted Tableaux to give a preinstalled look. Snug Seal is painted to match your Tableaux and blocks out light from the sides of your Tableaux and accounts for any minor surface discrepancies within your mounting frame. Available option for 1/2″, 3/4″ or 1″ thick inside-mount window treatments and decorative accents. 
  • Cornice Box Hardware – available option for 3/4″ & 1″ thick outside-mount window treatments (not pictured)
  • Adjustable Leveler Feet – available option for 1″ thick partitions
  • Metal Flat-Iron Rail  added to any unsupported spans over 36″
  • Aircraft Cable (specify drop length) – available option for 3/4″ & 1″ thick, suspended ceiling treatments, decorative accents, and partitions
  • Metal Angle-Iron Rail w/Eye Hooks (specify total linear ft) – available option for 3/4″ & 1″ thick, suspended ceiling treatments, decorative accents,  and partitions
  • U-Channel Wood Frame Attached (specify linear ft) – available option for 3/4″ & 1″ thick partitions and decorative accents
  • U-Channel Wood Frame Unattached (specify linear ft) – available option for 3/4″ & 1″ thick partitions and decorative accents
  • Metal Framing – Steel or Aluminum framing made specifically for your design project

Other Hardware Options

There are many creative ways to incorporate Tableaux Decorative Panels into almost any interior or exterior design project. We can offer you guidance & suggestions for other mounting methods not listed above. Work with your Tableaux Project advisor to create a custom hardware and installation plan.

Installation

We do provide installation instructions for the most common applications and mounting methods. If your project is more complex, you may need to hire a third-party independent contractor to help you. Below is a listing of websites where you can find contractors/installers in your area. The links are provided solely as a reference. We do not support or endorse any of these businesses.